Contents
- Getting started
- Installing
- First setup and pairing the apps
- Lines and card readers
- Messages and calls
- Routing
- eSIM
- Compatibility list
- Network exits and proxy engines
- Hotspot and Wi-Fi
- Telegram bot remote control
- Status light (LED)
- Updates and backups
- Troubleshooting
- Users in the UK
- Comparison with other tools
Docs / 14
Troubleshooting
When something is wrong, start with “Check line” under Overview. It shows the step where things stop. Here are the most common cases.
No line starts
- The usual reason is the authorization. The top of the page says “This gateway is not authorized yet”. Enter the product key under SettingsSystemDevice authorization, or choose “Verify authorization”.
- “Not started: over the plan's line count”: you have more lines than your plan allows. Switch another line off, or upgrade your plan.
- A line switched off, a SIM not seated or a wrong PIN: the line’s card says why.
The reader says there is no SIM, or the card does not respond
- “No SIM card in this reader.”: check that the card is in, the right way round.
- “Card not responding”: usually a poor contact. Take the card out and put it back; check that the adapter has not slipped and the contacts are clean.
- Then choose “Detect card” on that reader. If it still fails, try another card or adapter.
- A reader serves one program at a time. Close an old Cevix or any other card program first.
A line says “Data only”
The gateway judged the card to be a data SIM (a travel data SIM, a card with no SMS centre number, or a carrier that keeps refusing calls), so the line does not sign in for calls. If the card can call after all, choose “This card can call” on the line’s page; see Data-only cards.
Texts only while roaming
When a 4G VoLTE line roams onto a network that gives this SIM no VoLTE, it says there is no VoLTE here and only texts work. Use “Try another network” to move to another network, or switch to VoWiFi; see Check line.
Upgrading from 1.x says the signature does not match
Uploading the 2.0 update package in the 1.x web page shows a signature error. The file is fine: use the installer instead; see Upgrading from 1.x.
The browser cannot open the web interface
- Use
https://and port 8443:https://<gateway address>:8443. - Run
cevix statuson the gateway to check that it is running. - Windows Firewall may block 8443; add a rule yourself.
The 410 cannot be reached after a Wi-Fi change
A gateway reached by Wi-Fi alone that cannot find its saved Wi-Fi for 3 minutes opens the setup hotspot Cevix-Setup-XXXX, password 11451488888 by default. Join it with a phone, open the web interface and join the new network on the Wi-Fi page; see The setup hotspot.
The phone app cannot connect
- Pairing with the six-digit code needs the phone and the gateway on the same network; see Pairing the app.
- To use it away from home, turn on Cevix Link under SettingsConnectionsCevix Link.
A small machine runs out of memory
Signs: the web page is slow, or “Diagnostics” warns about memory.
- Do not run many proxy exits at once.
- If you do not use nodes or subscriptions, choose “Stop and disable” under “Proxy engines” on Network exits.
- Do not add swap on the 410 stick.
- If “Diagnostics” on a Raspberry Pi warns about low voltage, use a better power supply.
The status light is too bright
Turn it off or turn on night mode under SettingsSystemStatus light (LED); see Status light.
Can I call emergency numbers?
No. Cevix cannot call emergency numbers. Use your phone’s own dialler.
Reporting a problem
Choose “Download support bundle” under SettingsSystemDiagnostics, or “Export support bundle” in “Check line”. Personal details in the bundle are masked, but look it over before sharing. Send the bundle and a screenshot to your seller.