Contents
- Getting started
- Installing
- First setup and pairing the apps
- Lines and card readers
- Messages and calls
- Routing
- eSIM
- Compatibility list
- Network exits and proxy engines
- Hotspot and Wi-Fi
- Telegram bot remote control
- Status light (LED)
- Updates and backups
- Troubleshooting
- Users in the UK
- Comparison with other tools
Docs / 10
Hotspot and Wi-Fi
A 410 stick can share its internet with phones and computers: over a Wi-Fi hotspot or USB, from 4G mobile data or the home Wi-Fi. A Linux gateway on Wi-Fi can also change its Wi-Fi from the web interface, and when it cannot find any Wi-Fi it opens a setup hotspot so you can connect and fix it.
Which machines have it
- Hotspot: a Linux gateway with a built-in 4G module (such as the 410 stick) and NetworkManager. Without a Wi-Fi chip, only USB sharing works.
- Wi-Fi: a Linux gateway whose Wi-Fi is managed by NetworkManager.
Both pages are under SettingsConnections, and listed only where the machine can use them. Every plan has them; only “Hotspot exit” needs a plan with country exits.
Hotspot
Open SettingsConnectionsHotspot (the 410’s built-in 4G module page has a Hotspot card too):
- Wi-Fi hotspot: phones and computers join over Wi-Fi. The page shows a QR code to join the hotspot: scan it with the phone’s camera.
- USB sharing: the computer the 410 is plugged into gets online over USB.
“Connected devices” lists who is connected, beside today’s and this period’s data use.
Mode
- Concurrent (keeps the home Wi-Fi)
- The default. The hotspot runs beside the home Wi-Fi, on the home Wi-Fi’s channel. It starts only once the home Wi-Fi is connected; when the home Wi-Fi drops, the hotspot goes off until it is back (the page says it is waiting for the home Wi-Fi). The home Wi-Fi is never cut for the hotspot.
- Away mode
- Turning the hotspot on cuts the home Wi-Fi; the gateway goes online over 4G, and VoWiFi lines move to VoLTE or 4G mobile data. Used only when you choose it; the gateway never switches by itself.
If the Wi-Fi chip cannot run both at once, the choice says this gateway’s Wi-Fi chip cannot.
Internet source
- 4G mobile data
- Shares this SIM’s mobile data, charged by your plan. It needs the module’s mobile data on; turning it on warns you about the cost, and asks again while the SIM is roaming, where charges can be very high.
- Home Wi-Fi
- Shares the home Wi-Fi the gateway is on, with no mobile data. Connected devices reach the internet only, never the other devices or the router at home. Concurrent mode only.
Hotspot exit
Choose a country exit and all traffic of the connected devices, DNS included, leaves through it, with nothing to set up on the phone. If the exit is down, the devices have no internet; they never go direct instead. Only TCP goes through the exit; UDP (QUIC included) is blocked, and apps fall back to TCP by themselves. To go online directly, choose “Direct over 4G” or “Direct over the home Wi-Fi”. For country exits, see Network exits.
Hotspot settings
- Network name (SSID)
- Cevix- and four characters by default. “Hide the network name” makes phones type the name to join.
- Password
- The gateway makes one, and you can change it. Only the administrator sees the password and the QR code.
- Channel
- 2.4 GHz. Concurrent mode always uses the home Wi-Fi’s channel.
- Most devices at once
- How many devices may be connected at the same time; 8 by default.
- Daily data limit, Monthly data limit
- 0 means no limit. When a limit is reached, sharing pauses until the next period or until you raise the limit.
- Let hotspot devices open this admin page
- On by default in away mode, so you can manage the gateway over Wi-Fi when you are out; off by default in concurrent mode. Whoever joins the hotspot may not be you; the admin page still asks you to sign in. A computer on USB is not affected.
You can also check, turn on or turn off the hotspot with /hotspot in Telegram; see Telegram.
Wi-Fi
Under SettingsConnectionsWi-Fi:
- Current connection: which Wi-Fi the gateway is on, the signal and the address.
- Saved networks: each can “Connect”, “Change password”, turn “Connect automatically” on or off, set its “Priority” (higher numbers first), or “Forget”.
- Find networks: lists the Wi-Fi nearby; choose one and enter its password. For a network that does not show, use “Join a hidden network”. Open, WPA2 and WPA3 Personal networks are supported.
You may be reading the page over that very Wi-Fi, so the page can lose contact while the network changes. If the new network does not connect within about 30 seconds, the gateway goes back to the one it was on. Forgetting the last network that works asks you first.
The setup hotspot (when no Wi-Fi is found)
A gateway reached by Wi-Fi alone (no network cable, no computer on its USB) that cannot join any saved Wi-Fi for 3 minutes, after a move or a new router for example, opens a setup hotspot by itself:
- Network name
Cevix-Setup-XXXX(XXXX is the last four characters of this box’s Wi-Fi address)- Password
11451488888by default, the same on every box
- Join
Cevix-Setup-XXXXwith a phone or computer. - Open the web interface in a browser (usually
https://192.168.73.1:8443) and sign in as the administrator. - Under SettingsConnectionsWi-Fi, choose “Find networks” and join the new Wi-Fi. While it searches, the setup hotspot goes off for about 15 seconds and comes back.
As soon as the Wi-Fi connects, the setup hotspot closes by itself. Until then, the gateway tries its saved networks every 2 minutes. The setup hotspot shares no internet and uses no mobile data: it only opens the admin page, which still asks you to sign in.
“Open the setup hotspot when no Wi-Fi is found” is on by default and can be turned off on the Wi-Fi page. On a machine with the hotspot, “Setup hotspot password” in the hotspot settings sets a password of your own.